Water Heater Installation and Replacement in Knoxville, TN
Gas and electric tank water heaters. Repair, replacement, and maintenance. Free estimates. Call (865) 933-5538.
Also serving Farragut, Maryville, Alcoa, Oak Ridge, Powell, Sevierville, Clinton, Lenoir City, and all of East Tennessee.
Eventually, every water heater needs to be replaced. A leaking tank, a failed heating element, or rust-colored hot water usually means replacement is the most economical choice. Advanced Heat AC and Plumbing handles the whole job for homes and businesses throughout Knoxville and East Tennessee: sizing the right tank, installing it to code, removing the old unit, and testing the system before we leave. We also repair and maintain the water heater you already have.
We are a licensed, family-owned plumbing contractor serving Knoxville for three generations. Free estimates, upfront pricing, and financing through Wisetack with up to 24 months no-interest. License #48048.
Knoxville Water Heater Installations
When it is time to install a new water heater, our team helps with everything needed to size and install your new system. We offer a complete range of water heater services: installation and replacement, repair, and maintenance.
Every installation starts with a conversation about how your household uses hot water, what fuel your home is set up for, and where the heater is located. From there we recommend a unit, give you a written price, and schedule the work. If you are interested in on-demand hot water instead of a storage tank, see our separate tankless water heater installation page.
Signs You Need a Water Heater Repair or Replacement
Water heaters rarely fail without warning. Watch for these signs.
Rusty or discolored hot water. Rust in the hot water only, not the cold, often points to corrosion inside the tank.
Water pooling around the base of the tank. Even a small puddle can mean the inner tank is corroding.
Inconsistent temperatures. Water that swings between hot and lukewarm suggests a failing heating element, thermostat, or burner component.
Running out of hot water much faster than usual. A failed element, a damaged dip tube, or heavy sediment can shorten your hot water supply.
Loud rumbling, popping, or knocking sounds. These usually come from sediment buildup at the bottom of the tank.
Age. A traditional tank water heater typically lasts 8 to 12 years. If yours is over 10 years old, plan your replacement before it fails or leaks. Our guides on whether it is time for a water heater replacement and signs your water heater needs repair go deeper.
Repair or Replace Your Water Heater?
A repair makes sense when the tank is sound and a single component has failed, such as a heating element, thermostat, gas valve, or relief valve. Replacement makes sense when the tank itself is leaking or corroded, when the unit is at or past the end of its typical lifespan, or when repair costs begin to approach the price of a new unit.
We tell you honestly which one fits your situation and show you both prices. You decide. For more on the tradeoffs, see our guide to water heater repair and installation in East Tennessee.
Tank Water Heater Types We Install
Gas Tank Water Heaters
Gas tank units heat water faster than electric models and are the right fit for homes already plumbed for natural gas. Gas installations involve a gas connection, a flue or vent to the exterior, and a safe supply of combustion air. Our article on combustion air and water heater safety explains why venting matters.
Electric Tank Water Heaters
Electric units are slightly less expensive upfront and do not need a flue or gas line. That makes them a practical choice for homes without gas service or where venting is difficult.
Venting Options for Gas Water Heaters
Gas water heaters vent in different ways depending on the home. Atmospheric vent units use a flue that rises naturally through the roof. Power vent and direct vent units use a fan or sealed system, which gives more flexibility on where the heater can sit. We confirm the right venting method for your space before we quote.
Heat Pump (Hybrid) Tank Water Heaters
Heat pump water heaters are storage tanks that use electricity to move heat rather than generate it. They are worth asking about if energy use is a priority. Availability depends on your home’s space and layout, so ask us when you request your estimate.
Gas or Electric Water Heater: Which Should You Choose?
In most cases, it makes the most financial sense to stay with the fuel source your home is already set up to use. Switching from electric to gas, or from gas to electric, means running new utility lines or venting, which adds to installation cost. Gas units generally heat water faster. Electric units are slightly less expensive upfront.
If you are weighing a switch, our guides on choosing between gas and electric water heaters and understanding your options lay out the pros and cons.
What Size Water Heater Do You Need?
Sizing is based on the number of people in your household and your peak water usage. As a general guide:
40-gallon tank: ideal for 1 to 3 people.
50-gallon tank: works best for 3 to 4 people.
75-gallon tank: usually needed for homes with 5 or more people.
Peak usage matters as much as headcount. A home with several back-to-back showers, a large soaking tub, or heavy laundry loads may need a larger tank. Our guide on how to choose the right water heater walks through the decision.
Where Your Water Heater Is Installed Matters
Location changes the installation. Water heaters in garages, utility closets, basements, attics, and crawlspaces each have different requirements for clearance, venting, drainage, and access. An attic or upper-floor unit usually needs a drain pan and a drain line to protect the ceiling below if the tank leaks. A garage installation may need the burner raised off the floor. A tight closet may limit tank size or venting choices.
We evaluate the location during your estimate so the unit is installed safely and can be serviced easily later.
How Knoxville’s Water Quality Affects Your Water Heater
East Tennessee’s limestone bedrock creates hard water filled with calcium and magnesium. When that water is heated, it leaves scale deposits inside your tank. The scale forms a barrier between the heat source and the water, which forces the system to work harder, drives up energy bills, and shortens equipment life. Sediment that settles at the bottom of the tank is also what causes the loud popping or knocking sound many homeowners hear.
Understanding your water is the first step. Learn how to know if you have hard water, see how hard water impacts your plumbing system, or schedule a water analysis. A water softener can also reduce scale buildup, as explained in our guide on how water softening systems reduce scale.
Water Heater Brands We Install and Service
We install and service major tank water heater brands for residential and commercial customers, including Rheem, A.O. Smith, Bradford White, and State. If you have a brand in mind, or you want to replace your current unit with the same manufacturer, tell us when you call.
Our Water Heater Installation Process
Step 1. Assessment and sizing. We look at your household’s hot water use, your fuel type, your venting, and the space where the heater will live.
Step 2. Free written estimate. You get upfront pricing before work begins, with no surprises.
Step 3. Permits and code compliance. We handle the permits and make sure the installation meets local code. Learn more about plumbing permits in Knox County.
Step 4. Removal and installation. We drain, disconnect, remove, and properly dispose of your old unit, then set and connect the new one with fresh fittings, a shutoff valve, and the safety components your installation calls for. Those can include a temperature and pressure relief valve and, where required, a thermal expansion tank. See why modern plumbing codes require expansion tanks.
Step 5. Testing and walkthrough. We fire up the system, check for leaks, confirm temperature at your fixtures, and show you how to adjust the thermostat and what maintenance to schedule.
Curious about common mistakes? Read what Knoxville gets wrong with water heater installations.
Water Heater Repair Services
When your water heater is worth saving, we repair it. Common repairs include replacing failed heating elements and thermostats in electric units, replacing gas valves, thermocouples, and igniters on gas units, replacing a cracked dip tube, replacing a worn sacrificial anode rod, replacing a faulty temperature and pressure relief valve, and fixing leaks at fittings and connections.
Not sure what is wrong? Our guide to signs your water heater needs professional repair can help you describe the problem when you call.
Water Heater Maintenance and Flushing
You should have your tank water heater professionally flushed at least once a year to clear out accumulated sediment. The sacrificial anode rod, the metal rod that attracts rust so your tank does not corrode, should be checked every two to three years and replaced if it has worn away.
Regular maintenance can add useful years to a unit and helps it run efficiently. Read more on why routine tank flushes are important, extending the life of your water heater, and how to tell whether your water heater is wasting money. Our plumbing service plan can keep maintenance on a schedule for you.
Why Am I Running Out of Hot Water?
If your hot water cuts out sooner than it used to, a specific component has usually failed. In an electric water heater, the upper or lower heating element may have burned out. On either fuel type, a broken or cracked dip tube can send cold incoming water straight to the top of the tank instead of the bottom where it gets heated. Heavy sediment can also shrink the usable volume of the tank.
Other causes include a tank that is too small for your household or a thermostat set too low. See our guide on why your hot water runs out too quickly.
Emergency Water Heater Service
A leaking water heater is a plumbing emergency. Even a tiny puddle can mean the inner tank is corroding, and if the tank ruptures it can release a large volume of water into your home. If you spot a leak, turn off the water supply valve to the heater and call (865) 933-5538. Our guide on what to do in a plumbing emergency covers the first steps.
Residential and Commercial Water Heater Installation
We install water heaters in single-family homes, townhomes, condominiums, and multi-unit properties throughout Knox County and East Tennessee. We also serve businesses that rely on hot water every day, including restaurants, salons, and offices, through our commercial plumbing services.
Short-term rental owners in Sevier County face heavy hot water demand from large guest groups. See our guide to managing plumbing for Airbnbs in the Smoky Mountains, then call us to size the right system.
Permits and Code Compliance
Water heater installation generally requires a permit, and we handle that for you. Proper installation also covers venting, combustion air, relief valve discharge, and expansion control. Cutting corners here is how small installation errors turn into safety problems or failed inspections. Read the Tennessee plumbing code overview for Knoxville homeowners before you hire anyone.
Water Heater Installation Service Areas in East Tennessee
We install, repair, and maintain water heaters throughout Knoxville and a wide radius across East Tennessee.
Knox County: Knoxville, Farragut, Powell, Corryton, and all Knox County communities. Knox County is our primary service area.
Blount County: Maryville, Alcoa, Friendsville, Greenback, and Louisville.
Anderson County: Clinton and Oak Ridge.
Sevier County: Sevierville, Pigeon Forge, Kodak, and Dandridge.
Loudon County: Lenoir City and surrounding communities.
Jefferson County: Dandridge and Jefferson County communities.
Morgan County and Roane County: Both counties are covered. Call to confirm service to your address.
If you do not see your community listed, we may still serve you. Visit our service areas page or call (865) 933-5538.
Financing for Water Heater Installation
An unexpected water heater failure is a hard expense to plan for. We offer financing through Wisetack for repairs and replacements over $500, with up to 24 months no interest. Checking your eligibility does not affect your credit score.
Related Plumbing Services
Tankless Water Heater Installation: On-demand hot water, covered on its own page.
Water Line Repair: Repair and replacement of water supply lines.
Water Analysis: Testing to understand your water and protect your equipment.
Backflow Prevention: Protects your drinking water from contamination.
Drain Line Repair: Repair for slow, clogged, or damaged drain lines.
Sewer Line Repair: Trenchless and traditional sewer repair.
Commercial Plumbing: Plumbing services for businesses.
Plumbing Service Plan: Annual coverage with priority scheduling.
Frequently Asked Questions About Water Heater Installation and Repair
How long does a standard tank water heater last?
What are the warning signs that my water heater is failing?
Why is my water heater making a loud popping or knocking noise?
How does Knoxville’s water quality affect my water heater?
How much maintenance does a tank water heater need?
How do I know what size water heater tank my home needs?
Is a leaking water heater considered a plumbing emergency?
Should I replace my system with a gas or electric water heater?
Why am I suddenly running out of hot water much faster than usual?
Do you install tankless water heaters if I want to upgrade?
How long does it take to install a new water heater?
Do I need a permit to install a water heater?
Do you remove and dispose of my old water heater?
How much does a new water heater cost in Knoxville?
Why choose Advanced Heat AC and Plumbing for water heater installation?

